Standard Height Barrier - Fixed
BA1.HR6
Part of
our Strong & Simple range.
Our standard height
barrier is fabricated using 75mm x 75mm box section for the upright posts and 100 x 50mm rectangular steel for the cross beam.
Our height barriers are perfect for deterring unwanted visitors
to private areas. The strong, steel cross beam will not allow vehicles over a
certain height: hence the name.
Knocking bar available at
extra cost.
Please
note: We would always advise root fixing your height barrier at least half of
the above ground height. Therefore a 2.1m height barrier should be concreted
into the ground with a 1m root depth.
Barrier Colour
Select your required barrier colour. Our barriers can be powder coated in any colour, so if you require a specific colour which isn't listed then please contact us with the details.
The colour shown has been matched as closely as possible and does not serve as a standard for RAL colour products as it depends on your monitor. Use offical RAL colour product chart for reference.
Galvanised
Select whether your barrier is galvanised (to prevent rust)
Knocking bar
Select whether you want to add an optional knocking bar. This will act as a warning to vehicles before they hit the barrier itself.
